Radial Engineering SW4 Owner's Manual download pdf (Page 4)

True to the Music

Radial Engineering Ltd.

SW4 User Guide

FEATURE SET OVERVIEW

TOP PANEL DETAILS

6 7 9

108

1 2 3 4 5

1. INPUT CHANNELS (1-4): Each of the four independent

channels feature A/B switching, trim level controls, LED signal

indicators and PFL monitoring.

2. STEREO LINKING: Channels may be used independently or

linked together for stereo, tri-channel or quad switching.

3. PFL MONITOR: Pre-fader listen switch allows the A or B input

to be monitored via the headphone and auxiliary ¼” mono

outputs.

4. BUS OUT: Volume control with on/off switch and LED indicator

lets you set the level of the mix bus XLR and ¼” outputs.

5. PHONES: Headphone ampliﬁ er equipped with a level control

to monitor the stereo mix bus and PFL system.

6. POWER SUPPLY: External power supply connects with a

locking XLR connector for reliable power.

7. FOOT SW and LINK JACKS: The ¼” FOOT SW jack is used

to connect the optional Radial JR•2 remote control. The ¼”

LINK jack is used to pass the control command to more SW4s

and expand the number of channels.

8. BUS OUTPUTS: Stereo balanced XLR and unbalanced ¼”

outputs. Each channel can feed the bus whereby channels-1

and 3 are routed to the left output and channels-2 and 4 routed

to the right. A top mounted mono sum switch may be engaged

to route all four channels to both outputs.

9. CHANNEL INPUTS: Each channel has A and B balanced

inputs for connecting primary and backup source devices.

10. CHANNEL OUTPUT: Each of the four channels features a

balanced XLR output that is transformer isolated to prevent

hum and buzz caused by ground loops.

11 12 13 14

See below

11. GROUND LIFT: Disconnects the ground from the channel XLR

outputs to eliminate hum and buzz caused by ground loops.

12. BUS TRIM: This ‘set-n-forget’ control is used to set the level of the

left and right ¼” outputs. It allows the XLR and ¼” bus outputs to

operate at different levels.

13. BUS GROUND LIFT: Disconnects the ground from the stereo

bus XLR outputs to eliminate hum and buzz caused by ground

loops.

14. BUS ASSIGN: This two position switch lets you operate the

mix bus in either stereo or mono.

1 2 3 4 5 6 7 8 9 ... 15 16

Comments to this Manuals

No comments

Radial Engineering SW4 Owner's Manual Page 4

Comments to this Manuals

Related products and manuals for Network switches Radial Engineering SW4